• Use these to Hold the tire down, pushing the bead down into the relief valley (Drop Center) of the wheel while you insert to demount tip in to remove your tire.
  • Use them as a set of 3, to pre-compress tire while locking the wheel into our locking device.
  • Urethane Formula plastic is slightly flexible and unbreakable.
  • They won’t scratch or mar your wheels
  • Polyethylene spring plunger clamps onto inside of rim.
  • Usually they are black but we made some cool red ones too.
  • These clamps can also be used with automatic changers to hold the tire compressed into the drop center behind the shoe while the carriage is turning. They really help with the stiff ones. The less expensive machines don’t bog down as much and reduce the possibility of rim slippage in the rim clamp.
  • You will find these INVALUABLE once you’ve tried them.

Also available in 3Packs

No-Mar scratch proof motorcycle tire changer XtraHand Clamp

$39.50

$99 for a 3pack

What people are saying about the XtraHand Clamp:



Add Your Comment about the XtraHand Clamp:


    My IP Address is: 38.103.63.18

All submitted content may be edited, at the discretion of No-Mar Enterprises, Inc., for accuracy, spelling, grammar, and brevity.

Information



Products


Accessories

Valid XHTML 1.0 Transitional