Home > Catalog & Pricing >

Tire Lube Paste [7lb Tub]
Tire Lube Paste [7lb Tub]

Our Price: $49.95

AVAILABILITY/SHIPPING TIME: Usually Ships in 1 to 2 Business Days

Voted "The Best" Tire Mount Lubricant by Motorcycle Consumer News, November 2014!

One of our most popular products!

  • Super Slick Rubber Lubricant
  • Water Soluble
  • Dilute and use as a spray for tire removal or use directly as a paste for tire installation
  • Rust and corrosion inhibitor added so you won't corrode your rims
  • Use as a moisturizer for your inner tubes and installation of valve stems
  • Eventually absorbs into your tire
  • Stays where you put it, not runny (thick like petroleum jelly but without petroleum additives)
  • Also works great as an o-ring lubricant
  • Cleans up with water
  • Non-Toxic, vegetable-based
  • Sold by weight, not volume. Nominal weight = 7 lb.

Use it directly as a paste for tire installation without the use of water to keep your air pressure stable in hot tires. Water expansion from conventional water & soap lubricants is the leading cause of higher hot tire pressures. Nitrogen is useless if you use water lubricants.

This product is a "Super Lube". It is the best product we can offer and takes the work out of the work.


SHELF LIFE: Stored at room temperature in a sealed container, the paste should usually last at least 12 months. Higher or lower temperatures, and/or if left uncovered will shorten the shelf life. If at the end of the shelf life the paste begins to liquify, it may still be used in a spray bottle for demounting tires. Tire paste lube is a consumable supply and is not covered under any warranty. Any "white flecks" observed in the paste are air bubbles from the filling process. If the paste is allowed to freeze it may separate. Leaving the tub of paste in the warm summer sun for a couple of hours, or microwaving it on high (with the lid off) for 10-15 seconds will allow it to be stirred back into its usual brown/beige color and consistency.

Parts Unlimited / Drag Specialties Part # 0365-0080 / SP-LP70390513

This 1-Gallon tub is perfect for busy shops! If your No-Mar Tire Changer has one of our tool collars, you can refill the 1-pint jar from this 1-gallon tub.

*** Every new No-Mar Tire Changer or Mount/Demount bar already includes a pint of our lube paste!

Average Customer Review: 5 of 5 Total Reviews: 2 Write a review.

  2 of 2 people found the following review helpful:
Use liberally. Wipes off easily. Won't rust April 25, 2011
Reviewer: Kerry Wilson from Gadsden, AL United States  
This is great stuff. Watch the video. Use liberally. I have tried to put the first bead (Goldwing) over the rim with little or no paste, and it won't go on (front or back wheel). However, with the paste, it slides right on. It really saves a lot of pressure. It is a must for getting the final tool flipped over on the Goldwing tire also.
In addition, you can use this paste to mix up additional spray lube in your spray bottle that came with your machine. Just add 2 tablesoons, and warm water.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
Good stuff. January 27, 2010
Reviewer: BrooksCycleCenter.com from Fairfax, VA United States  
This tire paste is plenty slick to get the job done and it lasts a good long time.  When I bought my Tire-Changer in March of 2009, it came with a free little jar of the stuff.  I own a motorcycle shop and do about 3 or 4 tire changes a week and this stuff is just running out almost a year later.  I'm sure this 5 lb tub will last a long, long, long time.

Was this review helpful to you?

Browse for more products in the same category as this item:

Catalog & Pricing
Catalog & Pricing > Supplies