You are here: Home > Catalog & Pricing > Motion Pro Tools
Sort By:
Page of 3
Bead Buddy II - Motion Pro Motion Pro Bead Buddy II

  • Bead Buddy II is an improved design of the original Bead Buddy
  • Durable 6061 aluminum construction with blue anodized finish and laser engraved logo
  • A must for installing Bib Mousse tubes
  • Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires
  • Hooks over spoke and pushes bead down on opposite side of tire from tire irons
  • No more fighting to keep bead down while installing off-road tires

List Price: $15.99
Our Price: $14.99
You save $1.00!
Motion Pro Motion Pro Rim Lock Liteloc 1.60

  • One-piece molded design made from special high-strength nylon composite material

List Price: $18.99
Our Price: $14.99
You save $4.00!
Motion Pro Motion Pro Rim Lock Liteloc 2.15

  • One-piece molded design made from special high-strength nylon composite material

List Price: $18.99
Our Price: $14.99
You save $4.00!
Motion Pro Motion Pro Rim Lock Liteloc 1.85

  • One-piece molded design made from special high-strength nylon composite material

List Price: $18.99
Our Price: $14.99
You save $4.00!
Motion Pro Motion Pro Shock Punch Tool

  • Ideal tool for turning hard-to-reach lock ring and preload ring on rear shocks, without the need to disassemble the subframe
  • Long shaft to reach hard-to-get-at shocks
  • Angled brass tip gives secure bite and protects ring from damage
  • Heavy-duty construction

List Price: $54.99
Our Price: $14.99
You save $40.00!
Motion Pro Motion Pro Sprocket Jammer

  • Prevents rotation of chain and sprockets for easy removal or installation of countershaft nut
  • Can be used to pull rear wheel against chain blocks when tightening rear axle
  • CNC billet aluminum construction
  • Blue anodized finish and laser etching for easy identification

List Price: $18.99
Our Price: $15.50
You save $3.49!
Motion Pro Motion Pro Rim Lock Liteloc Nut / Washer kit

  • One-piece molded design made from special high-strength nylon composite material

List Price: $18.99
Our Price: $15.99
You save $3.00!
Chain Alignment tool  Motion Pro Motion Pro Chain Alignment tool

  • Quick and accurate alignment
  • Tool body clamps squarely to rear sprocket so the alignment rod will indicate sprocket alignment to chain

List Price: $19.99
Our Price: $17.99
You save $2.00!
Motion Pro Motion Pro Spark Plug Socket 14mm

  • Thin-wall design allows for use in small plug cavities
  • Can be driven with 1/4" drive ratchet, 13mm or 14mm wrench, socket or T-handle
  • Rubber plug retainer

List Price: $19.99
Our Price: $17.99
You save $2.00!
Motion Pro Motion Pro Fork Nut Cap Socket 1/2"

  • One-piece molded design made from special high-strength nylon composite material

List Price: $20.99
Our Price: $18.99
You save $2.00!
T-Handle Spinner 1/4" Motion Pro Motion Pro T-Handle Spinner 1/4"

T-HANDLE SPINNER 1/4"  Motion Pro Brand.

List Price: $22.99
Our Price: $19.99
You save $3.00!
T-Handle Spinner 3/8" Motion Pro Motion Pro T-Handle Spinner 3/8"

T-HANDLE SPINNER 3/8  Motion Pro Brand.

List Price: $22.99
Our Price: $19.99
You save $3.00!
Motion Pro Motion Pro Fork Cap Socket KTM

  • Fits KTM XC 14 models and all Husaberg 13-14 with WP 4860 4CS forks
  • For removing and installing LH and RH adjustable fork caps
  • Allows you to properly torque the fork cap assemblies during installation
  • 17mm hex head
  • Made from billet 6061-T6 aluminum
  • Anodized finish with laser engraving

List Price: $23.99
Our Price: $21.49
You save $2.50!
Motion Pro Belt Tensioner Gauge Motion Pro Belt Tensioner Gauge

Checking your belt tension made simple.

List Price: $24.99
Our Price: $22.49
You save $2.50!
Motion Pro Motion Pro Mini Bleeder 8mm

  • Combines wrench and bleeder valve into one convenient, compact tool
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome-moly steel body
  • Compact size for tight spaces
  • High-quality internal seal
  • Multi-position handle

List Price: $26.99
Our Price: $24.49
You save $2.50!
Motion Pro Motion Pro Mini Bleeder 10mm

  • Combines wrench and bleeder valve into one convenient, compact tool
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome-moly steel body
  • Compact size for tight spaces
  • High-quality internal seal
  • Multi-position handle

List Price: $26.99
Our Price: $24.49
You save $2.50!
Motion Pro Motion Pro Mini Bleeder 11mm

  • Combines wrench and bleeder valve into one convenient, compact tool
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome-moly steel body
  • Compact size for tight spaces
  • High-quality internal seal
  • Multi-position handle

List Price: $26.99
Our Price: $24.49
You save $2.50!
Motion Pro Motion Pro Mini Bleeder 3/8"

  • Combines wrench and bleeder valve into one convenient, compact tool
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome-moly steel body
  • Compact size for tight spaces
  • High-quality internal seal
  • Multi-position handle

List Price: $26.99
Our Price: $24.49
You save $2.50!
Motion Pro Motion Pro Brake Caliper Piston Tool

  • Ultra low-profile design removes pistons from monoblock disc brake calipers
  • Fits pistons with a center bore of 14mm to 28mm
  • Easy-to-use single locking screw
  • Works on aluminum, steel and titanium pistons
  • Non-marring design will not harm pistons or caliper
  • Billet aluminum and stainless steel construction

List Price: $26.99
Our Price: $24.49
You save $2.50!
Motion Pro Motion Pro 5 in 1 Damper Rod Bleed Tool

  • Tool design allows for effortless retrieval of damping rod after spring installation
  • Perfect for working on Kayaba, Showa and WP inverted forks
  • One-piece design means no lost parts
  • Rod includes downward-facing bleed port to prevent oil splatter
  • Five thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14 x 1.0
  • Precision billet aluminum construction with durable blue anodized finish and laser engraved markings

List Price: $28.99
Our Price: $25.99
You save $3.00!
Motion Pro Motion Pro Sag Scale II

  • Improved version of the original Motion Pro Folding Sag Scale
  • Swing-out design is compact and fits in most tool boxes
  • Adjustable zero-set point for direct scale reading (no subtracting required)
  • Cone-shaped axle locating pin fits hollow axles up to 20mm with repeatable precision
  • Made from 6061-T6 aluminum with durable blue anodized finish and laser engraved markings
  • Extended length 283/8" (720mm)
  • Folded length 153/4" (400mm)

List Price: $32.99
Our Price: $29.99
You save $3.00!
Motion Pro Pro Fill Pivot Air Chuck Motion Pro Fill Pivot Air Chuck

Motion Pro Pro Fill Pivot Air Chuck

Never get caught again with an air chuck that does not have the perfect angle to reach your valve stem! The Pro Fill Pivot Chuck has a unique angled head that can swivel 360 degrees to easily reach any valve stem. Once you find the perfect position, lock the device down so it's ready for use the next time. The pivoting angled head is perfect for difficult to reach tire valves on all types of motorcycles, bikes and more. The unique design also creates additional hand clearance between pumps and hot brake rotors. The Pro Fill Pivot Air Chuck comes equipped with a 1/4" NPT female inlet so you can use it with any common air hose coupling or fitting.


List Price: $34.99
Our Price: $31.99
You save $3.00!
Motion Pro Motion Pro Yamaha Spanner Nut Socket

  • Used for removal and installation of spanner (castle) lock nuts
  • Premium-quality high-carbon steel
  • Heat-treated for strength and durability
  • Durable hot black oxide finish
  • Laser-etched with Motion Pro logo and part number

List Price: $37.99
Our Price: $32.49
You save $5.50!
Motion Pro Motion Pro Suzuki Spanner Nut Socket- Motor Mount

  • Used for removal and installation of spanner (castle) lock nuts
  • Premium-quality high-carbon steel
  • Heat-treated for strength and durability
  • Durable hot black oxide finish
  • Laser-etched with Motion Pro logo and part number

List Price: $42.99
Our Price: $37.99
You save $5.00!
Motion Pro Motion Pro Fork Cap Socket Showa 50mm

  • For removing the fork cap and compression cartridge on Showa SFF forks
  • Outer ring fits 50mm octagonal fork cap
  • Inner body holds cartridge so it can be removed from fork cap
  • Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed
  • Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly
  • Easier and faster to use than any other tool now available
  • Billet 6061 aluminum construction with anodized blue finish
  • 1/2" square drive
  • Made in the U.S.A.

List Price: $41.99
Our Price: $38.99
You save $3.00!
Motion Pro Motion Pro Heim Joint tool

  • Aligns Heim joint for easy installation
  • Removes and replaces KTM Heim joints (OEM #50304090044) or aftermarket equivalents
  • Anodized aluminum construction reduces the possibility of damaging your swingarm
  • Aligns and installs Heim joint seals
  • Handle includes retention O-ring to hold Heim joint adapters and Heim joint bearing in place
  • Built-in stop correctly centers Heim joint in swingarm
  • Made from billet 6061-T6 and anodized Motion Pro blue

List Price: $42.99
Our Price: $38.99
You save $4.00!
Motion Pro Motion Pro Fork Cap Socket

  • For removing the fork cap and compression cartridge on twin chamber Showa forks found on late-model Honda, Kawasaki and Suzuki off-road motorcycles
  • Outer ring fits 50mm octagonal fork cap
  • Inner body holds cartridge so it can be removed from fork cap
  • Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed
  • Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly
  • Easier and faster to use than any other tool now available
  • Billet 6061 aluminum construction with anodized blue finish
  • 1⁄2" square drive
  • Made in the U.S.A.

List Price: $43.99
Our Price: $39.99
You save $4.00!
Motion Pro Motion Pro Spoon Lever Combo Set 22/12/13

  • Tire spoons with axle nut hex wrench or rim lock nut set available individually or in combo sets
  • Perfectly contoured tire lever on one end and a unique combination stepped box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other end
  • Made from lightweight forged 7075-T6 aluminum
  • Hard anodized finish
  • Under 10" in length and weigh only 3.5 oz.

List Price: $41.99
Our Price: $39.99
You save $2.00!
Motion Pro Motion Pro Spoon Lever Combo Set 24/12/13

  • Tire spoons with axle nut hex wrench or rim lock nut set available individually or in combo sets
  • Perfectly contoured tire lever on one end and a unique combination stepped box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other end
  • Made from lightweight forged 7075-T6 aluminum
  • Hard anodized finish
  • Under 10" in length and weigh only 3.5 oz.

List Price: $41.99
Our Price: $39.99
You save $2.00!
Motion Pro Motion Pro Spoon Lever Combo Set 27/12/13

  • Tire spoons with axle nut hex wrench or rim lock nut set available individually or in combo sets
  • Perfectly contoured tire lever on one end and a unique combination stepped box end wrench on other end for turning rim lock nuts or a hex box wrench sized for axle nuts on other end
  • Made from lightweight forged 7075-T6 aluminum
  • Hard anodized finish
  • Under 10" in length and weigh only 3.5 oz.

List Price: $41.99
Our Price: $39.99
You save $2.00!